Acoustic Revive SPC-Reference Cavo per diffusori 3+3 m non terminato [usato]

Acoustic Revive SPC-Reference - Cavo per diffusori (a metraggio, prezzo per metro).

Principio e struttura

Cavo di potenza per diffusori con conduttore in rame solid-core OFC P-COCC-A, con isolamento ad aria, con foglio di rame, e guaina esterna trattata alla tormalina.

Descrizione in aggiornamento.

PCOCC-A is an annealed version of PCOCC (mono crystalline high purity OFC) that was designed by Dr. Atsumi Ohno, - a Professors of Chiba Institute of Technology in Japan.
The annealing process is necessary for any material to be used as an audio cable. However, these materials are affected by this process, introducing unwanted impurities into the crystal grain structure. PCOCC does not have crystal grain therefore, there is no possibility of impurities being introduced during the process. PCOCC maintains its high purity even after the annealing process converts it to PCOCC-A, and the crystal structure gives the best conditions for uniform directionality.
PCOCC has hard single crystal, but once annealed and converted to PCOCC-A, conductivity improves and the material itself becomes flexible making it easier to use.

Domination of solid single track cable
Most speaker cables on the market consist of a multi-strand wire conductor which is made by many twisted thin wires. (Also Litz type speaker cable is made up of a group of multi-strand wire conductors) Due to stranded wire conductor being flexible and easy to use, most speaker cables on the market are made with a stranded conductor, however, multi-strand and Litz type wires generate stray current called “Strand jump phenomenon”.
This straying current causes incidental sound and distortion in the signal transmission and is the cause of impurities and gradation of sound. SPC-REFERENCE uses a solid single-core structure in which the straying current is not theoretically generated.
This allows a signal transmission extremely faithful to the original source without the incidental impurities in sound and distortion.
In addition, flexible handling is achieved, by examining and improving the cable structure closely, we also achieved excellent flexibility.

Air Insulation
We were able to implement air layers by installing dummy tubes, thus improving the conductivity and reduce vibration. The conductors are virtually floating with six thick and thin dummy tubes. This also creates an excellent shielding effect, a superior dielectric constant and vibration control, giving optimum conductivity and a high quality, full-bodied sound.

100% shielding with a copper foil
SPC-REFERENCE is equipped with a copper foil shielding for a 100% shielding effect.
Most ordinary speaker cables do not have any shielding, or they use mesh type shielding.
The mesh type shielding is full of open spaces and is unable to completely eliminate noise. Furthermore, the meshed shielding itself generates stray current which reduces the sound quality.
Also, shielding with aluminum foil or magnesium foil is not effective for the audio frequency range, this type of shielding pollutes the sound with the materials own characteristics.
Copper foil shielding is the most effective for the audio frequency range. This creates a superior signal transmission with high S/N ratio.

Tourmaline containing sheath
The outer sheath of the SPC-REFERENCE contains natural tourmaline powder.
Tourmaline is an ore with slight potential which generates negative ions with an external stress such as electric current or vibration. SPC-REFERENCE can avoid electrical and transmission losses by generating negative ions itself when an electrical signal is passed through the cable.

Very excellent “Cost vs Performance” ratio
We have a clear and pure sound with a solid single-core conductor. An open and vast sound stage is created by the air-insulation, full-bodied and superior tone created by the tourmaline sheath. The Cost to Performance ratio is simply superb.