Yamamoto YR-01 Teflon silver plating line shell lead

Pagliuzze con cavo di alta qualità, già saldate, corte, per installazione tra headshell e testina. Conduttore ad elevato spessore 22AWG in rame placcato argento e isolamento in Teflon. Il diametro dei contatti è 1mm da un lato e 1.2mm dall'altro. Attenzione: questo è lo standard ed è compatibile con tutte le testine e gli headshell. 

Descrizione in aggiornamento.

The Teflon covering silver plating copper wire of a very thick is adopted as the wire rod of YR-01 of a shell lead. This Teflon line is a line which our company is using for amplifier etc., and is manufactured based on MIL specifications and standards, it excels in durability, and electric insulation is also the highest wire rod. the thickness of a lead is the thickness 22, in AWG (American wire gauge) a cross-section area with 0.38 Skaer. The YRT-01 equivalent article of phosphorus bronze shaving out was adopted as the terminal. Improvement in sound quality can be aimed at with positive contact and a quality wire rod.

YR-01. Upgrade Cables for Head Shell / and or Cartridge. These connectors are made from bronze, gold plated. The wires are silver plated, TEFLON isolated. Designed for connecting the CARTRIDGE YC-02 to non-Yamamoto Head shells. The diameter to connect to the head shell is 1.0mm. The diameter to connect to the cartridge is 1.2mm. Do not reverse wires, or the 1.0mm connector will damage. For doing your own tuning, you can solder out the original Teflon wires, and replace them by your own choice of wire. When using Yamamoto Head shells., there is also set of wires with the head shell You can choose to use either set of wires. OFC Wire, 6N copper wire (99.9999%) pure, oxygen free.