×

Violectric HPA V202 Headphone Amplifier

Reference:
2705
Condition
New
€899.00 (tax incl.)
Available for immediate shipping.

Add to wishlist
Description

The Violectric HPA V202 is a new pure headphone amplifier in the Violectric range. The headphone amplifier is a further development of the multiple test winner HPA V200. It offers the incomparable natural and pleasant sound that made its predecessors famous.

With its special technology, the HPA V202 not only offers one of the most powerful headphone amplifiers on the market, but also:

LOWEST NOISE through a very small amount of internal gain.

This makes the amplifier's self-generated noise inaudible.

HIGH OUTPUT VOLTAGE through 50 V internal operating voltage.
Therefor ideally suited for high-impedance headphones deserving high output voltage swing.

HIGH OUTPUT POWER thanks to powerful amplifiers that offer far more power even the most demanding headphones would need.
So best suited for headphones with low impedances as well as magnetostatic headphones !!

HIGH DAMPING FACTOR due to lowest output impedance.
Therefor the ideal match for difficult to drive headphones without negative side effects and with the guarantee for a
uncompromising frequency response.

The rear line inputs can be selected via switches on the front. After the RK 27 volume control, the activated and buffered signal reaches the power amplifiers, which are a further development of the famous V200 circuits. Connect your headphones to the HPA V202 and enjoy a compact and great-sounding headphone amplifier with the renowned natural, smooth yet precise Violectric sound.

Features

  • Headphone Out: 1 (1/4" jack, unbalanced), 1 (4-pin XLR, balanced), 1 (Pentaconn, balanced)

  • Power supply: Internal 230V/115V AC

Technical Data:

All Data RMS unwtd., 20 Hz - 20 kHz, Pre-Gain set to 0 dB

Analogue input parameter

  • Inputs (stereo): 1 x XLR balanced, 1 x RCA, unbalanced
  • Max. input voltage: + 21 dBu
  • Input impedance: 10 kohm

Headphone amp parameter

  • Nominal input sensitivity: +6 dBu
  • Feedback gain: +8 dB
  • PRE-GAIN: -18 / -12 / -6 / 0 / +6 / +12 / +18 dBr
  • Frequency range: 5 Hz ... 250 kHz (- 0,5 dB)
  • Output impedance: 0,25 Ohm
  • Damping factor (Load 50 R): 200
  • Dynamic range: > 128 dB (A-wtd)
  • Noise: < -100 dBu (A-wtd)
  • THD+N (1kHz/2x10V/100R=1W): < -100 dB / < 0,001 %
  • THD+N (1kHz/2x4V/32R=0,5W): < -103 dB / < 0.0007 %
  • Crosstalk: -100 dB (1 kHz) / -95 dB (15 kHz)
  • Headphone outputs:1 x Pentaconn, unbal. / 1 x 1/4“ (6.3 mm) TRS jack

General

  • Supply voltage: 230 V AC / 115 V AC max. 10 VA
  • Front, Back: 5 mm / 2,5 mm Aluminum, black anodized
  • Case: 3 mm / 4 mm Aluminum, black anodized
  • Case dimensions: 170 x 54 x 228 mm (W x H x D)
  • Overall dimensions: 170 x 65 x 252 mm (W x H x D)

Power Output (mW) on different Impedance loads:

  • Please see images section
Read moreShow less
Product Details
2705
Designer
Reviews(1)
Overall rating
4
1 Review
Quality
(4)
Fino a poco tempo fa erp un pò scettico sugli amplificatori dedicati all'ascolto in cuffia.
Dopo l'acquisto del Violectric HPA V202 mi sono rcreduto.
L'ho ho da più di un mese, l'ho provato con sorgenti e dischi di ogni genere musicale, con registrazioni di qualità e con registrazioni non eccellenti.
In tutte le situazioni, partendo da un modello di cuffia che posso definire BASIC (Beyerdynamic DT880) il risultato di ascolto è superiore all'ascolto in cuffia attraverso l'uscita Cuffie dell'amplificatore integrato.

Penso che facendo un upgrade della cuffia, ovvero andando su qualche modello di range superiore a quelle che ho attualmente complessivamente non puà che migliorare.

Ho notato un miglioramento della scena sonora, del dettaglio ed un equilibrio generale del suono. Non vi è enfatizzazione dei bassi, degli alti, ma l'amplificatore riproduce esattamente ciò che è la qualità del disco e le sfumature dello stesso, questo ovviamente nel bene e nel male. Questa caratteristica è per quanto mi riguarda da premiare

Altro plus (che però al momento non ho sentito la necessità di utilizzare), ma che ho provato per valutarne l'effetto è la possibilità di incrementare o decrementare la potenza (gain) di uscita sul volume di ascolto da -18 db a + 18 db. E' un range ampissimo in grado di soddisfare qualsiasi tipologia di cuffie e/o qualità delle registrazioni

Ringrazio inoltre lo staff di Play Stereo che mi ha aiutato e consigliato in fase di acquisto rispondendo ad alcune domande e quesiti da me posti sul prodotto.

Lo consiglio, in particolare a chi per ragioni di ambiente è predisposto maggiormn

Leave a review

  • Quality:
Describe this product using simple and short words.
Disqus
You may also like

Settings

Menu

Create a free account to use wishlists.

Sign in