Acoustic Revive RLT-1K LAN Terminator

Acoustic Revive RLT-1 LAN Terminator - New "K" revision

NEW "K" Version containing the special "Kiyoh-seki" material with ultra-high negative ion emission

Differences and improvements between old RPC-1-EU version and the new RPC-1K-EU

1. Kiyoh (Ki.yo.u?)-seki was added to the blended natural ore.
2. Kiyoh-seki paint are painted inside.

**As to Kiyoh-seki
This is rare ore that principal component is aluminum silicate only available in Gunma Pre. in Japan.
Features are a high ability to generate negative ion and a high radiant intensity of far-infrared rays.
It generates minus-ion very much more than Tourmaline.
Kiyoh-seki: 9450 pcs/cc
Tourmaline: 2485 pcs/cc
http://www.k-2net.jp/kiyouseki.html

So, the efficiency and result of the RLT-1K is greatly raised

Achieve dramatic improvements in sound quality by noise control and the suppression of vibrations caused by network equipment.
The LAN terminator RLT-1 is based on the X-terminator which has been developed by Mr. Takashi Kanai(The Sound subjectivity engineer of SONY) and was completed by adding our vibration suppression technology. The RLT-1 improves sound quality by noise control and the suppression of vibrations caused by network equipment.

Refer to the web site of Mr. Takashi Kanai:
http://kanaimaru.com/NWA840/005.htm
http://kanaimaru.com/NWA840/0m.htm
http://kanaimaru.com/

Vacant LAN ports are the source of noise pollution
In addition to the significant noise being introduced by network equipment and their power supplies, large amounts aof additional noise is introduced via the vacant LAN ports which dramatically increases the problem. By using the RLT-1 with a vacant LAN port, its operation is stopped. Therefore, all unwanted noise pollution and the amplification of this noise is also eliminated. This results in an improvement in sound quality by reducing distortion and increasing the signal to noise ratio.

Improvement in sound quality via vibration control.
As network equipment housings are less robust than most audio equipment, they are affected even more by vibrations from loudspeakers, resulting in serious damage of sound quality. RLT-1 is made from of a solid and hard case of 2017S aircraft grade aluminum alloy (duralumin) and has built-in natural quartz resonators at two places in the body to enable very effective vibration control. By using the RLT-1 with network equipment, its un-sturdy housing is reinforced and it results in the improvement of sound quality by eliminating the blurred sound image and improving energy and density, etc.

Great effect also for DENON-LINK, Accuphase HS-LINK, Blue-ray disc player !
The RLT-1 works effectively for all kinds of equipment that have LAN ports. When there is a vacant LAN port on a DENON-LINK of Denon or HS-LINK of Accuphase, etc which is transmitting, using, the RLT-1 will make a dramatic improvements in sound and will also prevent noise pollution by reinforcement of the terminal plate.

The sound improvement of download sound source as well!
RThe RLT-1 is also effective for downloads sound sources. One of the merits of network audio is that we can try listening to the download sound source however, the noise on the network is significantly degrading the quality of the sound source. It is today very common in music production that sound quality is clearly degraded by the noise on a network path. When comparing a downloaded sound source cleaned by RLT-1 and the same without any anti-noise measures, the difference is so obvious that it almost seems that we are listening to a different performer or a different passage of music. When listening to music via P/C or network audio sources, anti noise measures are indispensable. We can say that PC/Network audio sources without ‘anti-noise’ measures are not really producing true information.

Dimensions: W12mm x H12mm(14.5mm incl. LAN lever H) x D71mm(incl. LAN connector)

Acoustic Revive at a glance

Acoustic Revive: Once you listen to it, you know the difference. The accessory and cable that not only changes sounds. The true accessory and cable manufacturer that revives the sound to most natural and real sound.

Acoustic Revive is a Japan producer of audio hi-end accessories and cables designed and engineered to obtain the best results today available. Construction quality is superb so they are also used in the major recording company.

The Japanese school of hi-end accessories for the fine optimization of an audio system, is here. Acoustic Revive takes audio tweaking very seriously, introducing materials and techniques extremely advanced:

- Using aerospace materials like the Duraluminium or physiological materials like natural quartz.
- Doing deep cryogenic treatments that, modifying the molecule structure, better the signal transmission.
- Employ demagnetizing treatments, to cancel the influence of the magnetic fields.
- Dimension and design basing on the Gold Section.
- Introduce the so-called "virtual grounding" concept.

When an audio hi-end system is treated with Acoustic Revive accessories, it sounds more detailed, natural, smooth, and also more deep, powerful and dynamic. Every Acoustic Revive product is 100% "Made in Japan".

Click here to download the Acoustic Revive brochure in Adobe pdf format.

Acoustic Revive products will not be shipped outside of Italy due to national distribution agreements restrictions.