Acoustic Revive R-AL 1 LAN insulated cable - length 1 m

The R-AL 1 cable represents the new entry level of the Acoustic Revive LAN cables, with a new know-how.

Simple external structure, with single PC-tripleC conductor and Teflon used as insulation. With very high quality connector, it allows to have a clear sound, with high, medium and low transparent frequencies, correcting any distortions coming from the network player to which it is connected.

The new extraordinary Acoustic Revive cables with tripleC conductors and Finemet rings, 1m long (extra length versions available in 0.5m steps - contact us for quotation).

PC-tripleC conductor, single line of superiority
- Realization air insulation structure, the Teflon insulated by ultra-high CP price
- Copper foil shield, tourmaline impregnated sheath to prevent external noise

A world first ! By using traditional Japanese forging processes, a new ‘ultimate’ conductor has been produced.

Forging process
Copper is compressed to 70% by forging tens of thousands of times by gradual application of pressure with a fixed angle and direction. (The constant angle continuation transfer forging method). By using this forging process, the transverse crystal grain boundary changes and becomes more longitudinal, crystals now have consecutive connections which makes current flow extremely smooth.

In addition, by forging, the conductor density is dramatically improved by destroying the internal air grains. This, in turn, improves the conductivity and the acoustic signature of the copper.

A conductor section before forging process

Electric current flow: The crystal structure and grain boundaries that are formed in a transverse state are a disturbance to the electric current and signal transmission.

So the Crystals and grain boundaries that were in a transverse state are elongated and become more longitudinal when they are forged repeatedly in the same direction.

By further continuous forging, crystal structures and grain boundaries are subdivided and lined up longitudinally which generates a smoother signal transmission.

Annealing process after core-wire processing
PC-TripleC wire after "Continuous Crystal Construction" process is further processed by Transfer Forging method for thinner wire.Then Annealing process is carried out under a temperature and time control depending on a thickness of the wire.In result, crystals fuse each other and change into more consecutive crystal.