Korf Audio TA-SF11R 11” Pivoting 11" gimbal tonearm with removable headshell

New product

2 500,00 €

This article it's not in stock but can be ordered and it will take a number of days indicated into the Blue tab below, to be shipped to you. Please verify the availability for immediate shipping of other eventual versions of the same product.

Brand: Korf Audio

 
Description

Korf Audio TA-SF11R

SPECIFICATIONS

Effective length278 mm
Pivot to spindle distance265 mm
Offset angle19°
Effective mass without headshell19 g
Effective mass with HS-A02 headshell29 g
Horizontal axis bearingFlexure pivot
Vertical axis bearingsCeramic hybrid rolling bearings
Armtube materialStainless steel
Headshell connectorOrtofon/SME/JIS type
Balance typeStatic
Minimum mass of headshell and cartridge combination10 g
Maximum mass of headshell and cartridge combination35 g
Cable connector5 pin MDIN, male
Internal wiring6N OFC Litz
Mounting typesJIS/Linn (min. Ø28 mm hole), SME
Mass without headshell and mounting collar, max420 g

Not included, but needed for operation:

  • 5-pin MDIN cable to connect your tonearm to your amplifier 
  • Pickup cartridge. If you are curious about compliance and effective mass compatibility, please use our calculator.
  • An electronic downforce scale

If you are mounting the tonearm on a wooden plinth, suitable wood screws should be sourced separately.

Flexure Pivot Horizontal Bearing
Monolithic flexure pivots are almost a hundred times more expensive than the usual rolling bearings. For that, you get amazing advantages:

  • Zero starting torque/no stiction 
  • No bearing chatter 
  • Great tracking of warps 
  • Less inner groove distortion
  • Lasts forever — no servicing, no lubrication
  • Not influenced by temperature/humidity/dust/age
  • Easy to replace if broken
What does a flexure bearing sound like? Smooth! Once you experience a tonearm that is free of bearing chatter, you will recognize the chatter's sonic signature in other designs. 
Steel Arm Tube
Based on a large study of arm tube materials, we chose a steel tube with 0.5mm wall thickness.

  • High bending resistance: 3 times higher than aluminium, 2 times higher than titanium of the same mass 
  • Low energy storage 

Why is steel seldom used in today's tonearms? It's not possible to simply replace an aluminium or titanium arm tube with a steel one. A whole new design is called for.
Widely Spaced Vertical Hybrid Ceramic Bearings
We did a study of vertical bearings's influence on sound, and chose hybrid ceramic rolling bearings for the task:

  • Better strength and precision 
  • Less chatter compared to closely spaced bearings 
  • Low starting torque/stiction 
  • Better resolution
  • Sharper dynamics
  • Better sibilance control
  • Less inner groove distortion 
  • Need no servicing or lubrication
Clamping Plinth Mounts 
For tightest plinth attachment possible. They give:

  • Better mounting precision 
  • Ease of adjustment 
  • Better plinth coupling
Magnetic Antiskating 
Magnetic antiskating has zero stiction. 

It would be a real shame to spend so much effort (and money) on our beautiful bearings, and then ruin their performance with a weight on a pulley. Or with a sliding lever.

Our magnetic antiskating is calibrated and uniform—the biasing force remains the same from the outer to the inner grooves.
Custom Headshell Connector 
To fully preserve the mechanical performance of both our unique ceramic headshell and the armtube, we designed our own connector:

  • Steel load-bearing part; aluminium alloy locking collar
  • Press-fitted into an armtube
  • Spring loaded, gold plated contact pins
  • Nylon isolator
Simple and Effective Alignment Gauge
To align your cartridge, with most other tonearms you need a protractor. It is fiddly, imprecise, hard to use, and puts your valuable cartridge or stylus at risk of damage.

TA-SF9R comes with a precise alignment gauge. It's easy to set up your cartridge exactly right in minutes. Even away from your turntable, at a comfortable well lit desk.

What Makes Korf Tonearms Special?

The Korf tonearms are a clean sheet rethink of what a tonearm should be. We focused on our audio priorities: quality of motion, rigidity, low energy storage, signal integrity, stability and longevity.

You will immediately hear the sonic benefit: Korf tonearms offer unmatched clarity, holographic imaging, real life dynamics, true tonality, sparkling highs and a really deep bass.

Write a review

Korf Audio TA-SF11R 11” Pivoting 11" gimbal tonearm with removable headshell

Write a review

 
Questions

14 other products in the same category:

Availability

Products availability:

  • SME Mount: 

    This product can be ordered and will be shipped within 2 days. Also see the Availability tab and eventual options of the same product.

  • JIS+SME: 

    This product can be ordered and will be shipped within 2 days. Also see the Availability tab and eventual options of the same product.

  • JIS Mount: 

    This product can be ordered and will be shipped within 2 days. Also see the Availability tab and eventual options of the same product.


  • Available for immediate shipping.

    Product is available.

  • This product can be ordered and will be shipped within a certain number of days.

    Product is available to be ordered and will be shipped within the specified days.

  • This product is out of stock. The product is not available to be ordered. It could be incoming and to be email informed when it will be available for ordering, please click on "Email me when available" or contact us.

If a product is available an insufficient quantity, the system will not let you finalize the order, so in this case please contact us to know the future date when more quantities will be available.
Product availability is real-time updated and correspond to our actual stock quantities (Green) or to estimated obtainability times (Blue); in the case of (Blue) products, although the specified times are a realistic and conservative estimate, have to be intended as indicative and not as a binding obligation.

If you place an order containing both readily available products (Green) together with products that will make available within the indicated number of days (Blue), will be shipped alltogether when all product types are into our wharehouse; if you’d like we immediately ship the in-stock articles, it’s better that you place a separate order, or contact us.

When your order is shipped, we send you an email containing all details to track it.

For any further information please contact the Customer Service, available from monday to friday (hours: 9-13 / 15-17).

Recently Viewed

Menu